+44(0)20 8935 5411

info@tribotonic.com

Metaspec

TriboTonic act as distributors for Metaspec ASTM standard specimens throughout Europe, the Middle East and Africa.

Metaspec have long been regarded as a leading manufacturer of precision test coupons. They provide a huge range of materials, alloys, shapes, and sizes of coupons. Many of the coupons they produce comply to the following standards – ASTM, FTM, MIL Spec, and numerous other specifications. 

X302-T : Complete set of test accessories–legs, nut & bolt, sleeve, spacers, and teflon insulators
302-4340 : Heat Transfer Test Specimen, ASTM D-4340
401-D-Mg-032x1x1-H1-P1 : Magnesium Alloy AZ31B H-24 (QQ-M-44), 1″ x 1″ x .032″, 2x 1/16″ hole opposite sides, polished 240 grit
401-B-1010-032x1x1-H1-P1 : Steel, Cold Rolled, Grade 1008-1010, 1″ x 1″ x .032″, 2x 1/16″ holes opposite sides, polished 240 grit
401-C-2024-032x1x1-H1-P1 : Aluminum Alloy QQ-A-250/4 (2024 T-3 Bare), 1″ x 1″ x .032″, 2x 1/16″ holes opposite sides, polished 240 grit
M408-A : Steel Specimen IAW ISO 7120.
X302-1384 : Test Specimen Set for ASTM D-1384. Specimen preweighed, assembled and packaged in VCI paper
409-943 : Copper & Steel Catalyst Coil, ASTM D-943
302-C : Brass, CA-260, 1″ x 2″ x 1/16″, with 17/64″ center hole, polished, for ASTM D-1384
302-B : Copper, CA-110, 1″ x 2″ x 1/16″,with 17/64″ center hole, polished, for ASTM D-1384
302-A : Steel, SAE-1020 CR, 1″ x 2″ x 1/16″, with 17/64″ center hole, polished, for ASTM D-1384
302-F : Cast Iron, SAE G-3500, 1″ x 2″ x 1/8″, with 17/64″ center hole, polished, for ASTM D-1384
302-E : Cast Aluminum, A-319, 1″ x 2″ x 1/8″, with 17/64″ center hole, polished, for ASTM D-1384
302-D : Solder, 30% Sn, 1″ x 2″ x 1/16″,with 17/64″ center hole, polished, for ASTM D-1384
401-PBz : Phosphor Bronze Alloy 510, QQ-B-750, Compostion A, ETP, 1″ x 1″ x .032″, polished
610-C : Tool Steel, AISI Grade W-1, Nominal 1% C, Annealed, 0.25″ diameter x 3″ long, polished per ASTM D-2070, 320 grit silicon carbide
410-Sn : Tin, 99.98% Pure, QQ-T-371, Grade A, 1″ x 1″ x .032″, polished
610-A : Copper, CA-110, Electrolytic, 0.25″ diameter x 3″ long, polished for ASTM D-2070, 320 grit silicon carbide
401 Pb : Chemical Lead, 99.9% Pure, ASTM B-29 Grade, 1″ x 1″ x .062″, polished
401-A-Copper-032x1x1xH1-P1 : Copper, CA-110, QQ-C-576, Annealed, ETP, 1″ x 1″ x .032″, 2x 1/16″ holes opposite sides, polished w/240 grit
407-C : Steel (SAE-1018 CR) Coker Panel, for FTM 791B-3462
415 : Copper Strip for ASTM D-2619, CA-110 1.3×5.1cm x 20 B&S gage (1/2″x2″x.031″), polished
153-A : Copper, CA-110, 1/2″ x 3″ x 1/8″, polished, for ASTM D-130 , 6.3.2
101-A : Steel, SAE-1010 Cold Rolled, #4 Temper, 2″x4″x1/8″ w/ two 1/8″ corner holes on one 4″ side , edges rounded and surfaces finished to 10-20 rms micro inch
153-C : Copper, CA-110, .492″ x 2.95″ x 3/32″ polished, for ASTM D-130, 6.3.2
409-2272 : Copper (UNS C11000) catalyst coil, #14 AWG, for ASTM D2272 oxidation test
408-A : Specimen: Steel, SAE-1018, Rust Bath. Ground finish for ASTM D-665

Get a quote

Fill in the form below letting us know how we can help and someone will get back to you as soon as possible.